Seamax Blue Portable Electric Air Pump for Inflatable Boat, Kite (No Battery)

Seamax Blue Portable Electric Air Pump for Inflatable Boat, Kite (No Battery)

$150.00


End Date: Monday May-28-2018 16:54:54 PDT
Buy It Now for only: $150.00
Buy It Now | Add to watch list

View on Ebay
















eBay

Seamax 12V Electric Air Pump - Fast Speed & Support Max 8.5PSI
Designed for Inflatable Boat, Raft, and Kite (Color: Yellow or Blue)

Sky Blue Version with Best Quality & Never Overheat
2 Years Warranty - Only Available when Purchase with Seamax Marine



  • Main Features: LCD Display, Digital Control & Digital Pressure Gauge, Dual Motors & Double Stages, Built in Turbo Fan & High Pressure Compressor; Input: DC12V / 40A / Max Power Dissipation: 500W. Max 500L Air per Minute & Max Working Pressure 60Kpa (8.5 PSI). Pressure Increments: Per 1Kpa / 0.15 PSI & Start from 1 PSI. Pump Auto Stop. Maximum Continuous Working Time: 30 Minutes.
     
  • Enter the maximum desired pressure by using the set pressure button. The pump provides readings in metric (KPa).  (Pressure: 10KPa = 100mbr = 1.45 PSI).  Default working pressure is set at 25KPa (3.6 PSI) for heavy duty inflatable boat. 45Kpa / 6 PSI for inflatable kite. 
     
  • Press the POWER button to start. During inflation, the left hand side of LCD screen shows the pressure that the inflator has reached. As soon as entered set pressure has been reached, the inflator turns off automatically.  Take off the air hose from the chamber once the pump stops running. The inflator can be turned off manually at any time bypressing the POWER button.
     
  • The pump comes with Kite air valve adaptors in the package. The 2nd stage jumping point has small difference comparing with boat version. The Kite version pump is also good for Inflatable boats and it has all the features as the pump standard version.

  • Standard Version: for inflatable boats and kites up to 6 PSI / 50 Kpa. Reinforced Version: for 7 PSI / 50 Kpa or higher applications.
     
Pump Operation Detail Instruction
  1. Choose the proper fitting for the air valve of your inflatable boat, kite or paddle board. Put the valve at the inflation position. Attach the correct valve adapter to the inflation hose that comes with your pump. Attach the other end to the pump (smooth round outlet on the pump).

  2. Connect the pump’s terminals to the battery paying close attention to the polarity. Make sure the clips are on the same color electrode and properly connected. Otherwise the pump won’t turn on or run properly.  

  3. Enter the maximum desired pressure by using the set pressure button. The set pressure will be shown on the right hand side of the LCD screen. The pump provides readings in metric (KPa).  (Pressure: 10KPa = 100mbr = 1.45 PSI).  Factory default working pressure is set at 25KPa (3.6 PSI).This pressure is suitable for most inflatable boats. 45Kpa is 6 PSI to support the inflatable kite.   

  4. Press the POWER button to start. During inflation, the left hand side of LCD screen should show the pressure that the inflator has reached. As soon as entered set pressure has been reached, the inflator turns off automatically.  Take off the air hose from the chamber once the pump stops running. The inflator can be turned off at any time by pressing the POWER button again. It is possible to stop the inflator at any time by pressing this button.

  5. The inflator operates in two stages which can be identified by the noise of the turbine at the beginning followed by the piston. The inflator switches from turbine to piston automatically.  If the chamber pressure is over 7KPa / 1 PSI, the pump will start the 2nd stage only. If the set pressure is lower than the chamber’s pressure, the pump won’t be started.

Additional Information

  1. This pump is suitable for the products that are using the HR (Halkey-Roberts), Bravo or similar type air valve, Leafield valve etc. This kind of air valve has a turning pin at the middle to control the valve’s Open & Closed position. There are universal valve adapters supplied with the pump to fit it. We have the Pump in Kite version, Please know the Kite version pump also good for Inflatable boats and all application same as the regular pump version.

  2. The inflator operates in two stages which can be identified by the noise of the turbine at the beginning followed by the piston. The inflator switches from turbine to piston automatically. If the chamber pressure is over 7KPa / 1 PSI, the pump will start the 2nd stage only. If the set pressure is lower than the chamber’s pressure, the pump won’t turn on.

  3. Use for Deflation - You can use it to deflate the same chamber too. Attach the yellow hose onto the deflation side of the inflator (round outlet with notches). Attach the other end to the chamber you wish to deflate.

  4. Warranty - For recreational using, the electrical control boards, motor, charger are guaranteed for 2 years. Air hose, valve adapters and carrying bag are guaranteed for 6 months. Warranty for commercial use is limited to six months from purchase date.

Seamax Shipping Service

  1. We can ship out your order by most couriers, truck freight, air freight and post service depending the order;
  2. Courier Shipment transit time is about 3 - 8 business days within USA & Canada after you place the order;
  3. Shipping to Yukon, Northwest Territory and Nunavut has additional shipping charge $20;
  4. Shipments to (USA) Alaska, Hawaii, Puerto Rico, Virgin Islands has additional shipping charge $25;



Thanks for visiting Seamax eBay Store
!